corrosion consultancy,corrosion courses,corrosion expert witness

Home | Consulting | Training | Expert Witness | Failure Analysis | Design Review | Corrosion Test | Corrosion Software | Protective Coatings | Materials Selection | Cathodic Protection | >>>

Modern Techniques for Corrosion Testing and Monitoring in Concrete Structures

Course Outline | Who Should Attend | Registration | In-House | On-Demand | Online Courses | PPT Slides+Testbank | Course List | Why WebCorr


 Course Overview

 

This one-day corrosion short course thoroughly and systematically covers the principles and applications of a wide range of the latest techniques for corrosion testing and monitoring in concrete structures. These modern techniques can provide rapid and sensitive measurements and detection of corrosion in concrete structures. An optional one-day practical will enable the participants to gain hands on experience in using the state-of-the-art equipment for corrosion testing and monitoring in concrete structures.

 

This corrosion short course can be taken as in-house training course, online course and distance learning course worldwide. It can also be customized to meet the specific needs of your organization.

 

Course Outline |Who Should Attend |Registration |In-House |On-Demand |Online Courses |PPT Slides+Testbank |Course List


 Course Outline

 

1. The Need for Corrosion Testing and Monitoring in Concrete Structures

1.1 Assessment of the Extent of Corrosion Damage
1.2 Determing the Rate of Corrosion Damage
1.3 Early Warning - Monitoring the Rate of Corrosion Damage
1.4 Evaluating the Effectiveness of Repair/Rehabilitation

2. The Nature of Corrosion Process in Concrete Structures

2.1 Concrete Corrosion: What it is
2.2 Physical Changes  Due to Corrosion
2.3 Chemical Changes Due to Corrosion
2.4 Corrosion Rate and Current Density

3. Indirect Methods for Corrosion Testing and Monitoring

3.1 Depth of carbonation
3.2 Depth of chloride penetration
3.3 Electrical resistance (ER probe)
3.4 Concrete resistivity
3.5 Half-cell potential mapping (ASTM standard C876)
3.6 pH, Temperature
3.7 Moisture

4. Direct Methods for Corrosion Testing and Monitoring

4.1 Linear polarisation resistance measurement
4.2 Potentiodynamic polarization
4.3 AC Impedance measurement
4.4 Electrochemical noise measurement

5. Design of Corrosion Sensors in Concrete Structures

5.1 Overview of sensor designs
5.2 Interfaces with sensors
5.3 Advantages and limitations
5.4 Cost considerations

6. Practical Sessions (optional 1-day)

Actual concrete cubes will used for the following measurements:
6.1 Half-cell potential mapping
6.2 pH & cabonation
6.3 Linear polarization resistance measurement
6.4 Potentiodynamic polarization
6.5 AC Impedance measurement

Course Outline |Who Should Attend |Registration |In-House |On-Demand |Online Courses |PPT Slides+Testbank |Course List


Who Should Attend This Corrosion Course

 

Corrosion practitioners, researchers, designers, architects, technical managers, inspection and maintenance engineers, quality control personnel and those involved in failure analysis.

 

 Registration for This Corrosion Course

 

Click here to register for this corrosion course online, or

Click here to download this corrosion course brochure with registration form in PDF format.

 

 In-House Training Corrosion Courses and On-Site Training Corrosion Courses

 

If you are concerned with corrosion in your company, in-house training or on-site training is a great solution to train a group of employees from design, production, operation, quality assurance, inspection and maintenance, and technical sales and support on corrosion control and corrosion prevention technology. The contents of all our corrosion courses can be customized to fit your organization's needs.

 

There is no limit to the number of participants required for in-house training corrosion courses. We conduct the in-house training corrosion course at your company's premises worldwide, and at a time convenient to your company.

 

Click here to contact us for a quotation for in-house training corrosion courses.

 Corrosion Course-On-Demand

 

All our publicly scheduled corrosion short courses are conducted once a year. However, you do not need to wait for one year if you have missed any of the publicly scheduled corrosion courses as we have this unique corrosion course-on-demand scheme: we will conduct the course just for you (on an one-on-one basis) or for a small group from your company at a time and in a location convenient to you. This option costs significantly less than a full-scale in-house or on-site corrosion training program.

 

Click here to contact us for a quotation.

 Online Corrosion Courses and Distance Learning Corrosion Courses

 

All our corrosion short courses are available for online or offline distance learning. You can start an online corrosion course at any time and learn at your own comfortable pace and schedule, whenever and wherever you are. You have around-the-clock access to the interactive and media-rich course materials, virtual labs, course instructions and course assessments. Discussions and questions related to the corrosion courses are posted on the website or exchanged through email for a period up to 3 months. Video conferencing or instant messaging can also be arranged for discussions of course topics. For those who do not have ready access to internet, we can send you our online course materials on a CD-ROM, or DVD, or USB flash drive for offline distance learning.

 

Click here to to register an online corrosion short course.

 
 PowerPoint Slides and Test Banks for Trainers, Instructors, Tutors, University Lecturers and Professors

 

If you are involved in teaching or training, you may wish to purchase a complete set of the trainer's package for this training course. The trainer's package comes complete with ready-to-use PowerPoint slides (fully editable) and test bank (with answer keys). These ready-to-use PowerPoint slides contain high quality color photographs, illustrations, animations, audio and video clips. The test bank contains questions conveniently grouped into four categories: (1) true or false, (2) multiple choice, (3) calculation, and (4) reasoning and open-ended discussions. The trainer's package is suitable for in-house training and university teaching. This is exactly the same package that WebCorr uses to deliver our current training course.

The one-time lump sum fee allows your organization to use the training package and also modify it. For example, your organization may modify the course contents and re-name/re-brand the course under your organization’s name. WebCorr only retains the copyright of the original PowerPoint slides and test banks.

 

Click here to contact us if you need more information on the trainer's package.

Course Outline |Who Should Attend |Registration |In-House |On-Demand |Online Courses |PPT Slides+Testbank |Course List


Home | Contact Us

Copyright © 1995-2024. All rights reserved.