Proper selection of materials and design are most effective in cutting the cost of corrosion and achieving low cost reliability as corrosion can be designed out of the system. It is always easier and cheaper to erase lines on a drawing than to repair or replace failed equipment or components in service. The theme throughout the course is how to put the right material in the right place in the right way. Practical rules in selection of materials and design guidelines against many different types of corrosion will be presented. Numerous case histories of real-life problems and practical solutions will be discussed.
This 5-day corrosion short course is available for in-house training, online and distance learning worldwide. It can also be customized to meet the specific needs of your organization.
1.1 Introduction to corrosion control
1.2 The importance of design in corrosion prevention
1.1.1 Materials selection
1.1.2 Process parameters
1.1.3 Construction parameters
1.1.4 Geometry for drainage
1.1.5 Dissimilar metals
1.1.7 Corrosion allowance
1.1.8 Operating lifetime
1.1.9 Maintenance and inspection requirements
1.3 Effects of design and material selection on corrosion
1.3.1 Designer's role in controlling corrosion
1.3.2 Equipment Service Life Factors
1.3.3 Frequency of Corrosion Failures
1.3.4 Corrosion Rate Derivation and Calculation
1.4 Exercises and practical session
2.1 Practical corrosion cells commonly encountered in design
2.1.1 Galvanic cell
2.1.2 Concentration cell and differential aeration cell
2.1.3 Active/Passive Cell
2.1.4 Thermogalvanic Cell and temperature cell
2.1.5 Stress cell
2.2 Basic metallurgy for materials selection
2.3 Exercise and practical session
3.1 Materials selection for corrosion control -Metals and Alloys
3.1.1 Cast irons
3.1.2 Carbon steels
3.1.3 Low alloy steels
3.1.4 Stainless steels
3.1.5 Duplex stainless steels
3.1.6 Nickel and nickel-base alloys
3.1.7 Copper and copper alloys
3.1.8 Aluminium and aluminium alloys
3.1.9 Titanium and titanium alloys
3.2 Exercise and practical session
4.1 Materials selection for corrosion control –nonmetals
4.1.4 Ceramic materials
4.2 Compatibility of materials and environments
4.2.1 The effects of environment on corrosion
4.2.2 Materials for high temperature corrosion
4.2.3 Matching materials performance to environments
4.3 Corrosion modeling and corrosion prediction with CRA-Compass
4.4 Exercise and practical session
5.1 Design solutions to corrosion problems based on types of corrosion
5.2 Design solutions to corrosion problems
based on fabrication techniques and
5.2 Specifications and guidelines
5.2.1 Specification writing for maximum corrosion resistance
5.2.2 International standards relevant to materials selection and design
5.2.3 What the designer should remember when writing specifications
5.3 Design against corrosion: the DOs and DON'Ts
5.4 Exercise and practical session
|Who Should Attend This Corrosion Course|
This 5-day corrosion short course provides an excellent avenue for corrosion practitioners, researchers, designers, technical managers, inspection and maintenance engineers, quality control personnel and those involved in failure analysis to update their appreciation of corrosion prevention through materials selection and design.
Successful completion of this corrosion course helps participants prepare for their NACE certification examinations at the Corrosion Technician, Corrosion Technologist and Senior Corrosion Technologist levels.
|Registration for This Corrosion Course|
Click here to register for this corrosion course online, or
Click here to download this corrosion course brochure with registration form in PDF format.
|In-House Training Corrosion Courses|
If you are concerned with corrosion in your company, in-house training or on-site training is a great solution to train a group of employees from design, production, operation, quality assurance, inspection and maintenance, and technical sales and support on corrosion control and corrosion prevention technology. The contents of all our corrosion courses can be customized to fit your organization's needs.
There is no limit to the number of participants required for in-house training corrosion courses. We conduct the in-house training corrosion course at your company's premises worldwide, and at a time convenient to your company.
Click here to contact us for a quotation for in-house training corrosion courses.
All our publicly scheduled corrosion short courses are conducted once a year. However, you do not need to wait for one year if you have missed any of the publicly scheduled corrosion courses as we have this unique corrosion course-on-demand scheme: we will conduct the course just for you (on an one-on-one basis) or for a small group from your company at a time and in a location convenient to you. This option costs significantly less than a full-scale in-house or on-site corrosion training program.
Click here to contact us for a quotation.
|Online Corrosion Courses and Distance Learning Corrosion Courses|
All our corrosion short courses are available for online or offline distance learning. You can start an online corrosion course at any time and learn at your own comfortable pace and schedule, whenever and wherever you are. You have around-the-clock access to the interactive and media-rich course materials, virtual labs, course instructions and course assessments. Discussions and questions related to the corrosion courses are posted on the website or exchanged through email for a period up to 12 months. Video conferencing or instant messaging can also be arranged for discussions of course topics. For those who do not have ready access to internet, we can send you our online course materials on a CD-ROM, or DVD, or USB flash drive for offline distance learning.
Click here to to register an online corrosion short course.
|PowerPoint Slides and Test Banks for Trainers, Instructors, Tutors, University Lecturers and Professors|
If you are involved in teaching corrosion courses, you may wish to purchase a complete set of PowerPoint slides and the computerized test banks (in MicroTest format) with solutions. These presentations are suitable for teaching corrosion courses at different levels (from undergraduate to postgraduate) and durations (from 6 hrs to 40 hrs). These ready-to-use corrosion PowerPoint slides contain high quality color photographs, illustrations, animations and video clips. They can also be easily edited and customized to your own styles. The corrosion test banks contain over 1,000 corrosion questions for your use in tutorials, tests or examinations. These questions are conveniently grouped into 4 categories in the test bank: (1) true or false, (2) multiple choice, (3) calculation, and (4) reasoning and open-ended discussions).
Click here to contact us if you need more information.
Copyright © 1995-2020. All rights reserved.