|
|
ASTM - American Society for
Testing and Materials
- B 117 - 97 Practice for Operating Salt Spray
(Fog) Apparatus
- C 876 - 91 Test Method for Half-Cell Potentials
of Uncoated Reinforcing Steel in Concrete
- G 1 - 90 Practice for Preparing, Cleaning,
and Evaluating Corrosion Test Specimens
- G 2 - 88 Test Method for Corrosion Testing of
Products of Zirconium, Hafnium, and Their Alloys in Water at 680oF or in Steam
at 750oF
- G 2M - 88 Test Method for Corrosion Testing of
Products of Zirconium, Hafnium, and Their Alloys in Water at 633oK or in Steam
at 673oK [Metric]
- G 3 - 89 Practice for Conventions Applicable to
Electrochemical Measurements in Corrosion Testing
- G 4 - 95 Guide for Conducting Corrosion Coupon
Tests in Field Applications
- G 5 - 94 Reference Test Method for Making
Potentiostatic and Potentiodynamic Anodic Polarization Measurements
- G 15 - 97a Terminology Relating to Corrosion and
Corrosion Testing
- G 16 - 95 Guide for Applying Statistics to
Analysis of Corrosion Data
- G 28 - 97 Test Methods of Detecting
Susceptibility to Intergranular Attack in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- G 30 - 97 Practice for Making and Using U-Bend
Stress-Corrosion Test Specimens
- G 31 - 72 Practice for Laboratory Immersion
Corrosion Testing of Metals
- G 32 - 92 Test Method for Cavitation Erosion
Using Vibratory Apparatus
- G 33 - 88 Practice for Recording Data from
Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
- G 34 - 97 Test Method for Exfoliation Corrosion
Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
- G 35 - 88 Practice for Determining the
Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to
Stress-Corrosion Cracking in Polythionic Acids
- G 36 - 94 Practice for Evaluating
Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride
Solution
- G 37 - 90 Practice for Use of Mattsson's
Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc
Alloys
- G 38 - 73 Practice for Making and Using C-Ring
Stress-Corrosion Test Specimens
- G 39 - 90 Practice for Preparation and Use of
Bent-Beam Stress-Corrosion Test Specimens
- G 40 - 98 Terminology Relating to Wear and
Erosion
- G 41 - 90 Practice for Determining Cracking
Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
- G 44 - 94 Practice for Evaluating Stress
Corrosion Cracking Resistance of Metals and Alloys by Alternate Immersion in 3.5% Sodium
Chloride Solution
- G 46 - 94 Guide for Examination and Evaluation of
Pitting Corrosion
- G 47 - 90 Test Method for Determining
Susceptibility to Stress-Corrosion Cracking of High-Strength Aluminum Alloy Products
- G 48 - 97 Test Methods for Pitting and Crevice
Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride
Solution
- G 49 - 85 Practice for Preparation and Use
of Direct Tension Stress-Corrosion Test Specimens
- G 50 - 76 Practice for Conducting Atmospheric
Corrosion Tests on Metals
- G 51 - 95 Test Method for Measuring pH of Soil
for Use in Corrosion Testing
- G 52 - 88 Practice for Exposing and Evaluating
Metals and Alloys in Surface Seawater
- G 54 - 84 Practice for Simple Static Oxidation
Testing
- G 56 - 82 Test Method for Abrasiveness of
Ink-Impregnated Fabric Printer Ribbons
- G 57 - 95a Test Method for Field Measurement of
Soil Resistivity Using the Wenner Four-Electrode Method
- G 58 - 85 Practice for Preparation of
Stress-Corrosion Test Specimens for Weldments
- G 59 - 97 Practice for Conducting Potentiodynamic
Polarization Resistance Measurements
- G 60 - 95 Test Method for Conducting Cyclic
Humidity Tests
- G 61 - 86 Test Method for Conducting Cyclic
Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-,
Nickel-, or Cobalt-Based Alloys
- G 64 - 91 Classification of Resistance to
Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
- G 65 - 94 Test Method for Measuring Abrasion
Using the Dry Sand/Rubber Wheel Apparatus
- G 66 - 95 Test Method for Visual Assessment of
Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
- G 67 - 93 Test Method for Determining the
Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss
After Exposure to Nitric Acid (NAMLT Test)
- G 69 - 97 Practice for Measurement of Corrosion
Potentials of Aluminum Alloys
- G 71 - 81 Guide for Conducting and Evaluating
Galvanic Corrosion Tests in Electrolytes
- G 73 - 93 Practice for Liquid Impingement Erosion
Testing
- G 75 - 95 Test Method for Determination of Slurry
Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
- G 76 - 95 Test Method for Conducting Erosion
Tests by Solid Particle Impingement Using Gas Jets
- G 77 - 97 Test Method for Ranking Resistance of
Materials to Sliding Wear Using Block-on-Ring Wear Test
- G 78 - 95 Guide for Crevice Corrosion Testing of
Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing
Aqueous Environments
- G 79 - 83 Practice for Evaluation of Metals
Exposed to Carburization Environments
- G 81 - 97a Test Method for Jaw Crusher Gouging
Abrasion Test
- G 82 - 83 Guide for Development and Use of a
Galvanic Series for Predicting Galvanic Corrosion Performance
- G 83 - 96 Test Method for Wear Testing with a
Crossed-Cylinder Apparatus
- G 84 - 89 Practice for Measurement of
Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion
Testing
- G 85 - 94 Practice for Modified Salt Spray (Fog)
Testing
- G 87 - 97 Practice for Conducting Moist S02 Tests
- G 91 - 97 Practice for Monitoring Atmospheric S02
Using the Suffation. Plate Technique
- G 92 - 86 Practice for Characterization of
Atmospheric Test Sites
- G 96 - 90 Guide for On-Line Monitoring of
Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
- G 97 - 97 Test Method for Laboratory Evaluation
of Magnesium Sacrificial Anode Test Specimens for Underground Applications
- G 98 - 91 Test Method for Galling
Resistance of Materials
- G 99 - 95a Test Method for Wear Testing with a
Pin-on-Disk Apparatus
- G 100 - 89 Test Method for Conducting Cyclic
Galvanostaircase Polarization
- G 101 -97 Guide for Estimating the Atmospheric
Corrosion Resistance of Low-Alloy Steels
- G 102 - 89 (1994)` Practice for Calculation of
Corrosion Rates and Related Information from Electrochemical Measurements
- G 103-97 Test Method for Performing a
Stress-Corrosion Cracking Test of Low Copper Containing AI-Zn-Mg Alloys in Boiling 6%
Sodium Chloride Solution
- G 104 -89 Test Method for Assessing Galvanic
Corrosion Caused by the Atmosphere
- G 105 - 89 Test Method for Conducting Wet
Sand/Rubber Wheel Abrasion Tests
- G 106 - 89 Practice for Verification of Algorithm
and Equipment for Electrochemical Impedance Measurements
- G 107 -95 Guide for Formats for Collection and
Compilation of Corrosion Data for Metals for Computerized Database Input
- G 108 -94 Test Method for Electrochemical
Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- G 109-92 Test Method for Determining the Effects
of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete
Exposed to Chloride Environments
- G 110 - 92 Practice for Evaluating
Intergranular Corrosion Resistance of Heat-Treatabie Aluminum Alloys by Immersion in
Sodium Chloride + Hydrogen Peroxide Solution
- G 111 -97 Guide for Corrosion Tests in
High-Temperature or High-Pressure Environment, or Both
- G 112 - 92 (1997) Guide for Conducting
Exfoliation Corrosion Tests in Aluminum Alloys
- G 115 - 93f' Guide for Measuring and Reporting
Friction Coefficients
- G 116-93 Practice for Conducting Wire-on-Bolt
Test for Atmospheric Galvanic Corrosion
- G 117-93 Guide for Calculating and Reporting
Measures of Precision Using Data From Interlaboratory Wear or Erosion Tests
- G 118-96 Guide for Recommended Format of Wear
Test Data Suitable for Databases
- G 119-93 Guide for Determining Synergism Between
Wear and Corrosion
- G 123-96 Test Method for Evaluating
Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling
Acidified Sodium Chloride Solution
- G 129-95 Practice for Slow Strain Rate Testing to
Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
- G 132-96 Test Method for Pin Abrasion Testing
- G 133-95 Test Method for Linearly Reciprocating
Ball-on-Flat Sliding Wear
- G 134-95 Test Method for Erosion of Solid
Materials by a Cavitating Liquid Jet
- G 135-95 Guide for Computerized Exchange of
Corrosion Data for Metals
- G 137-97 Test Method for Ranking Resistance of
Plastic Materials to Sliding Wear Using a Block-on-Ring Configuration
- G 139-96 Test Method for Determining
Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using
Breaking Load Method
- G 140-96 Test Method for Determining Atmospheric
Chloride Deposition Rate by Wet Candle Method
- G 142-96 Test Method for Determination of
Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High
Pressure, High Temperature, or Both
- G 143-96 Test Method for Measurement of
Web/Roller Friction Characteristics
- G 146-96 Practice for Evaluation of Disbonding of
Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery
Hydrogen Service
- G 148-97 Practice for Evaluation of Hydrogen
Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
- G 149-97 Practice for Conducting the Washer Test
for Atmospheric Galvanic Corrosion
- G 150-97 Test Method for Electrochemical Critical
Pitting Temperature Testing of Stainless Steels
|