|
|
NACE - National Association of Corrosion
Engineers
ANSI/NACE Standard RP0104-2004 The Use
of Coupons for Cathodic Protection Monitoring Applications
ANSI/NACE Standard RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment
Methodology
ANSI/NACE Standard RP0300-2003 Corrosion and fouling in industrial cooling water
systems - Part 1: Guidelines for conducting
pilot-scale evaluation of corrosion and fouling control additives for open
recirculating cooling
water systems
MR0103-2005 Materials Resistant to Sulfide Stress Cracking in Corrosive
Petroleum Refining Environments.
MR0174-2001 Recommendations for Selecting Inhibitors for Use as Sucker-Rod
Thread Lubricants
MR0176-2000 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield
Environments
NACE MR0175/ISO 15156, Petroleum and natural gas industries — Materials for use
in H2S-containing Environments in oil and gas
production
NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning
NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to
Bottoms of Carbon Stee...
NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel
Process Vessels
NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of
Thermal Spray Coatings (Me...
NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning
NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning
NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning
NACE No. 5/SSPC-SP 12 Surface Preparation and Cleaning of Metals by Waterjetting
Prior to Recoating
NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete
NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning
RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines
RP0102-2002 In-Line Inspection of Pipelines
RP0169-2002 Control of External Corrosion on Underground or Submerged Metallic
Piping Systems
RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic
Alloys from Polythionic A...
RP0176-2003 Corrosion Control of Steel Fixed Offshore Structures Associated with
Petroleum Producti...
RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic
Structures and Corr...
RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design
Considerations for T...
RP0180-2001 Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers
RP0185-96 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for
Underground or Submerged...
RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel
Well Casings
RP0187-05 Design Considerations for Corrosion Control of Reinforcing Steel in
Concrete
RP0188-99 Discontinuity (Holiday) Testing of New Protective Coatings on
Conductive Substrates
RP0189-2002 On-Line Monitoring of Cooling Waters
RP0191-2002 The Application of Internal Plastic Coatings for Oilfield Tubular
Goods and Accessories
RP0192-98 Monitoring Corrosion in Oil and Gas Production with Iron Counts
RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank
Bottoms
RP0195-2001 Recommended Practice for Corrosion Control of Sucker Rods by
Chemical Treatment
RP0196-2004 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of
Steel Water Storage...
RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve
Data Files
RP0198-2004 The Control of Corrosion Under Thermal Insulation and Fireproofing
Materials—A Sys...
RP0199-2004 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy
Roll-Bonded and Explosi...
RP0200-2000 Steel-Cased Pipeline Practices
RP0205-2005 Recommended Practice for the Design, Fabrication, and Inspection of
Tanks for the Storag...
RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids
RP0274-2004 High-Voltage Electrical Inspection of Pipeline Coatings
RP0281-2004 Method for Conducting Coating (Paint) Panel Evaluation Testing in
Atmospheric Exposures
RP0285-2002 Corrosion Control of Underground Storage Tank Systems by Cathodic
Protection
RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines
RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel
Surfaces Using a Re...
RP0288-2004 Inspection of Linings on Steel and Concrete
RP0290-2000 Impressed Current Cathodic Protection of Reinforcing Steel in
Atmospherically Exposed Co...
RP0291-2005 Care, Handling, and Installation of Internally Plastic-Coated
Oilfield Tubular Goods and...
RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution
Control and Other Proces...
RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of
Concentrated Sulfuric Acid...
RP0295-2003 Application of a Coating System to Interior Surfaces of New and Used
Rail Tank Cars
RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of
Existing Petroleum Refin...
RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including
Flow Coating of Transf...
RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service
RP0302-2002 Selection and Application of a Coating System to Interior Surfaces
of New and Used Rail ...
RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application,
Performance, and Quali...
RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for
Oilfield Pipelines
RP0375-99 Wax Coating Systems for Underground Piping Systems
RP0386-2003 Application of a Coating System to Interior Surfaces of Covered
Steel Hopper Rail Cars i...
RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for
Offshore Applicatio...
RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces
of Carbon Steel Wat...
RP0390-98 Maintenance and Rehabilitation Considerations for Corrosion Control of
Atmospherically Exp...
RP0391-2001 Materials for the Handling and Storage of Commercial Concentrated
(90 to 100%) Sulfuric ...
RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open
Recirculating Cooling Water S...
RP0394-2002 Application, Performance, and Quality Control of Plant-Applied,
Fusion-Bonded Epoxy Exte...
RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars
RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar
Coating and Lining Inspec...
RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems:
Application, Performance, ...
RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for
Girth Weld Joints: Ap...
RP0403-2003 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery
Equipment and Piping
RP0472-2005 Methods and Controls to Prevent In-Service Environmental Cracking of
Carbon Steel Weldm...
RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water
Handling for Injection i...
RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives
and Vapor Corrosion I...
RP0490-2001 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings
of 250 to 760 µ...
RP0491-2003 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems
RP0492-99 Metallurgical and Inspection Requirements for Offshore Pipeline
Bracelet Anodes
RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating
and Lining Applicat...
RP0497-2004 Field Corrosion Evaluation Using Metallic Test Specimens
RP0502-2002 Pipeline External Corrosion Direct Assessment Methodology
RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed
Current Deep Groundbeds
RP0575-2001 Internal Cathodic Protection Systems in Oil-Treating Vessels
RP0590-96 Recommended Practice for Prevention, Detection, and Correction of
Deaerator Cracking
RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used
Rail Tank Cars in C...
RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application,
Performance, and Qualit...
RP0690-2004 Standard Format for Collection and Compilation of Data for
Computerized Material Corrosi...
RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail
Cars
RP0775-2005 Preparation, Installation, Analysis, and Interpretation of Corrosion
Coupons in Oilfield...
RP0892-2001 Coatings and Linings Over Concrete for Chemical Immersion and
Containment Service
TM0101-2001Measurement Techniques Related to Criteria for Cathodic Protection on
Underground or Subm...
TM0102-2002 Measurement of Protective Coating Electrical Conductance on
Underground Pipelines
TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of
Plate Steels Used in We...
TM0104-2004 Offshore Platform Ballast Water Tank Coating System Ev
TM0105-2005 Test Procedures for Organic-Based Conductive Coating Anodes for Use
on Concrete Structur...
TM0169-2000 Laboratory Corrosion Testing of Metals
TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product
Pipelines
TM0173-2005 Methods for Determining Quality of Subsurface Injection Water Using
Membrane Filters
TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and
Lining Materials on Met...
TM0177-2005 Laboratory Testing of Metals for Resistance to Sulfide Stress
Cracking and Stress Corros...
TM0183-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of
Tubular Goods in an Aqu...
TM0185-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of
Tubular Goods by Autocl...
TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 µm (10
to 30 mils) Dry...
TM0187-2003 Evaluating Elastomeric Materials in Sour Gas Environments
TM0190-98 Impressed Current Laboratory Testing of Aluminum Alloy Anodes
TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression
Environments
TM0193-2000 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning
Solutions at Temperatures Below 93°C (200°F)
TM0194-2004 Field Monitoring of Bacterial Growth in Oilfield Systems
TM0197-2002 Laboratory Screening Test to Determine the Ability of Scale
Inhibitors to Prevent the Pr...
TM0198-2004 Slow Strain Rate Test Method for Screening Corrosion-Resistant
Alloys (CRAs) for Stress ...
TM0199-99 Standard Test Method for Measuring Deposit Mass Loading (Deposit
Weight Density) Values fo...
TM0204-2004 Exterior Protective Coatings for Seawater Immersion Service
TM0284-2003 Evaluation of Pipeline and Pressure Vessel Steels for Resistance to
Hydrogen-Induced Cra...
TM0286-2001 Cooling Water Test Unit Incorporating Heat Transfer Surfaces
TM0294-2001 Testing of Embeddable Impressed Current Anodes for Use in Cathodic
Protection of Atmosph...
TM0296-2002 Evaluating Elastomeric Materials in Sour Liquid Environments
TM0297-2002 Effects of High-Temperature, High-Pressure Carbon Dioxide
Decompression on Elastomeric M...
TM0298-2003 Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield
Environments
TM0299-99 Corrosion Control and Monitoring in Seawater Injection Systems
TM0304-2004 Offshore Platform Atmospheric and Splash Zone Maintenance Coating
System Evaluation
TM0374-2001 Laboratory Screening Tests to Determine the Ability of Scale
Inhibitors to Prevent the P...
TM0384-2002 Holiday Detection of Internal Tubular Coatings of Less Than 250 µm
(10 mils) Dry-Fi...
TM0397-2002 Screening Tests for Evaluating the Effectiveness of Gypsum Scale
Removers
TM0398-98 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning
Solutions at Temperatur...
TM0399-99 Standard Test Method for Phosphonate in Brine
TM0404-2004 Offshore Platform Atmospheric and Splash Zone New Constrction
Coating System Evaluation
TM0497-2002 Measurement Techniques Related to Criteria for Cathodic Protection
on Underground or Sub...
TM0498-2002 Standard Test Methods for Measuring the Carburization of Alloys Used
for Ethylene Cracking Furnace Tubes
TM0499-99 Immersion Corrosion Testing of Ceramic Materials
|